Create a directional map or 3D map in Visio 2007

Author: mety Nagm Labels::



Use the Directional Map and Directional Map 3D templates to create drawings of simple maps.
Use directional map shapes, including clearly identifiable roadways, metro lines, and landmarks, to create easy-to-read maps and route directions.
Directional map diagram
Use 3D directional maps to illustrate small geographic areas, such as villages or towns, using colorful three-dimensional shapes.
3-D directional map diagram

Create a directional map

  1. On the File menu, point to New, point to Maps and Floor Plans, and then click Directional Map.
  2. Add road, railroad, and metro shapes to your map to establish the route structure. HideAdd road shapes
    1. From Road Shapes, drag a road shape (such as Road round or Curve 1) onto your map, and then resize the shape as necessary.
    2. To set the thickness of a road shape, right-click it, and then click a thickness setting (Thin, Standard, Thick, or Custom). If you choose Custom, you can drag a selection handle Selection handle image or control handle Control handle image - yellow diamond to change the road thickness.
    3. To change the direction of a road shape, on the Shape menu, point to Rotate or Flip, and then click a rotate or flip command. Tip You can also change the direction of a shape by clicking one of the flip buttons (Button image or Button image) or rotate buttons (Button image orButton image) on the Action toolbar, or rotate a shape using the Rotation handle Button image.
    4. From Road Shapes, drag other shapes, such as bridges, roundabouts, and interchanges to your map.
    5. Connect road shapes, using straight segments to connect curved roads and intersections. Glue an end point End point image, which is plus sign in a green square on a Road round or Road square shape to a connection point Connection point image - blue X or begin point Begin point image - green square with X inside on another road shape.
    HideAdd metro shapes
    1. From Metro Shapes, drag metro shapes onto your map.
    2. To change the direction of a metro shape, click the Flip Horizontal Button image or Flip Vertical Button image button on the Action toolbar, or rotate the shape using the Rotation handleButton image.
    3. Use straight metro line segments to connect curved metro shapes. Glue the end point End point image, which is plus sign in a green square of a Metro line or Rounded metro shape to a connection point Connection point image - blue X or begin point Begin point image - green square with X inside on another metro shape.
  3. From Landmark Shapes, drag shapes onto your map to indicate natural features (such as trees and lakes) or buildings (such as schools and hospitals). Tip To widen or lengthen a shape, drag a side selection handle. To resize a shape proportionally, drag a corner selection handle.
  4. Label your map. HideAdd text to a shape
    Select the shape you want to add text to, and then type.
    HideAdd a callout
    From Landmark Shapes, drag the Callout shape onto the drawing page, position it where you want text to appear, and then type.
    HideAdd a text block
    1. From Landmark Shapes, drag a Text block shape onto your map.
    2. To replace existing text, select the shape, and then type.
    3. To change the width of the text block (and change word wrapping), drag a side selection handle Selection handle image.
  5. Add scale and directional indicators. HideAdd a scale indicator to a map
    1. From Landmark Shapes, drag the Scale shape onto your map.
    2. To associate the scale with a specific distance, select the shape and then type to add a distance measurement.
    HideAdd a directional indicator to a map
    1. From Landmark Shapes, drag the Direction or North shape onto your map.
    2. To make the shape point a different direction, click the Rotate Right Button image or Rotate Left Button image button on the Action toolbar, or use the Rotation handle Button image.
  6. You can change the relative thickness of all road and metro shapes in your map.
    1. Make sure no shapes are selected. Right-click the drawing page, point to Shape, and then click Shape Data.
    2. For Road Width and Metro Width, type a base width value. This value will be applied to thin roads and thin metro lines. The width of standard and thick roads and metro lines will be based on multiples of this value.

Create a 3D map

  1. On the File menu, point to New, point to Maps and Floor Plans, and then click Directional Map 3D.
  2. From Directional Map Shapes 3D, drag road shapes onto the drawing page. You can duplicate road shapes by selecting the shape, and then pressing CTRL+D. Repeat to create multiple road segments.
  3. Align the shapes to create the road configuration you want. HideTips
    To nudge a shape into position, select the shape and then press the arrow key that represents the direction you want.
    To create a longer road or a road grid that can be moved as a single unit, group multiple road shapes together.
  4. Drag other shapes, such as bridges, buildings, and cars onto your map.
  5. To rotate a selected shape, drag the Rotation handle 3-D directional map diagram.
  6. To add text to shapes, select a shape, and then type.

0 comments |

Labels

Blog Archive

Powered by Blogger.

I made these pages for me and my friends to help solving the problem we face regarding Computer & internet, if anyone wants me to answer a question or find out about some information please send me email and I will try to reply.*P.S. some of the article I wrote and the other I found on the internet I posted them in sprit of learning and shearing, please forgive me if you found something you don’t want to be in my blog, email me and I will delete them. Thank you for your interest in my pages.امل نجم Amal Nagm

banner 1 banner 2