Amal Nagm

From the minute I have heard that Obama is coming to Egypt to address the entire Muslim world I had a very little expectation because I know his positions on every issue from his campaign, I have had flowed the USA presidential election very closely, I almost watched every speech he had given, I know how will spoken he is, and how good he deliver speech, but nothing prepared me to his speech, the speech was very good he addressed so many issues.

He was very smart to begin the speech by greeting his audience in Arabic, He shown a great sign of respect when he talked about the "Prophet Mohamed", he quoted from EL Quran very wisely every time in its right please, he was open Minded when he talked about veil "Hijab " and women rights.

He was honest regarding American – Israeli relationships and in the same time he did not neglected the Palestinians Rights and the two States solution, and that is a great change in his Policies .

I think He was different in his way of speaking and his tone but not different in his Policies, and he didn't say anything in specifics

he really have to do more than taking to Convince me, we all need to see actions, especially after I have seen him change his opinions more than once from the begin of the elections until now , especially on Prosecuted American Officer for Torture prisoners.

You can watch the speech on youtube:

http://www.youtube.com/watch?v=NaxZPiiKyMw&feature=player_embedded

You can read the speech text:

http://www.whitehouse.gov/the_press_office/Remarks-by-the-President-at-Cairo-University-6-04-09/

My personal thoughts on "Menekse ile halil" series

To the writers of "Menekse ile halil "I want to tell you have created a very great love story I really loved the innocence love between Menekse and halil, I admire every character complicity, but I will never forgive you were really cruel over and over again why should you make "Menekse" suffer most of the series by put here throw two Rape Attempt and getting Rape in the Third time, one time was more than horribly enough

You made both of Menekse and halil go throw hill and back for what, to kill halil in the end and make Menekse faces life all on her own without the one she loves and with a baby on the way, what is the point! Why did you break them apart this way?!

Why did you bring halil mother back just to kill him in front of her eyes for the second time?!

To the director in my opinion you have directed a very successful series, very admirable casting everyone acted together in harmony, the locations was very beautiful, But Why did you repeat the Rape Scenes over and over again, believe me sir once was more than unbearable

Great Set Decoration, brilliant makeup artist, wonderful soundtrack, breathtaking songs

Kivanç Tatlitug What a great performance in every aspect, you was sweet and tender when you should and you was a very courageous and strong when it was needed, you could not been more believable,you have represented a greet role model, you deserve both an Emmy and Golden Globe Awards

Sedef Avci you have really represented every girl that had to face the same circumstances both in turkey and in Egypt, you were very natural and you too deserve both an Emmy and Golden Globe Awards

Hasan Küçükçetin your performance made me want to kill you from the first episode

Caner Candarli, Mehmet Cevik, Nergis Çorakçi, Yildiz Kültür, Firat Tanis whatever I say about your performance I cannot gave justice

كتاب عجائب الآثار في التراجم والأخبار

الواجهة - الفهرس

للتحميل اضغط هنا

او

المجلد1

للتحميل اضغط هنا

او

المجلد2

للتحميل اضغط هنا

او

المجلد3

للتحميل اضغط هنا

او

المجلد4

للتحميل اضغط هنا

او

المؤلف
عبد الرحمن بن حسن الجبرتي (1167 - 1240هـ)

المحقق
عبد الرحيم عبد الرحمن عبد الرحيم [عن طبعة بولاق]

6) Click on Extend Volume or Shrink Volume to extend or shrink the selected partition.

7) Right click on the new partition than click Create new sample partition

8) A wizard will appear to assign a letter and properties for the new partition

Related controls

• Scrolling region If you want your region to include scroll bars so that users can scroll to see information that is out of view, use a scrolling region instead of a horizontal region.
  
• Section If you don't need your region to wrap as the form is resized, you can use a section instead of a horizontal region. Unlike horizontal regions, which are unbound controls, sections are bound (bind: To connect a control to a field or group in the data source so that data entered into the control is saved. When a control is unbound, it is not connected to a field or group, and so data entered into the control will not be saved.) to groups in the data source (data source: The collection of fields and groups that define and store the data for an InfoPath form. Controls in the form are bound to the fields and groups in the data source.).
  

Compatibility considerations

Insert a horizontal region

1. On the form template, place the cursor where you want to insert the control.
2. If the Controls task pane is not visible, click More Controls on the Insert menu, or press ALT+I, C.
3. Under Insert controls, click Horizontal Region.
4. To add controls to the horizontal region, drag the control that you want from the Controls task pane to the horizontal region.

Layout tips

• To change the border or background color of a horizontal region, select it. On the Format menu, click Borders and Shading, and then make the necessary adjustments in the Borders and Shading dialog box.
• To change the size of several horizontal regions at the same time, select them, press ALT+ENTER, and then make the necessary adjustments in the Properties (Multiple Selection) dialog box.
• By default, InfoPath inserts horizontal regions at a width that matches that of the printed page. To change this default setting, on the View menu, click View Properties. On the General tab, under Layout settings, select the Use a custom layout width for this form template check box, and then type a different number in the Custom layout width box.
• If you specify a custom layout width for horizontal regions, make sure that it isn't wider than the printable area for your form template. To quickly see how wide your printed page is — and whether the content on the form template will fit on the page — on the View menu, click Page Width Guide. When you click this command, a dashed vertical guide appears on the right side of the screen. This guide indicates the right margin of the printed page, based on the default printer for your computer.
• You can refine the spacing both in and around the horizontal region by changing the padding, which is the amount of buffer space surrounding the region's contents, or by changing the margins, which is the amount of space between the region's border and any surrounding text or controls on the form template. To adjust the spacing for a horizontal region, double-click it. In the Horizontal Region Properties dialog box, click the Size tab, and then adjust the margin and padding options as appropriate.

• Enable users to enter dates of their choice on a form, such as start and end dates for a particular project.
• Use the today and now functions (function: A predefined XPath expression that returns a value based on the results of a calculation.) to show today's date and time on a form.
• Display dates from an external data source, such as billing and shipping dates from a database of customer orders.

The user experience

Compatibility considerations

• Date pickers are fully supported only in Windows Internet Explorer browsers. In other Web browsers, the date picker appears as a text box, although date formatting options are supported in the text box.
• Placeholder text is text that appears inside a control on a form template. An example of placeholder text is "Click here and type." Although you can leave placeholder text settings for browser-compatible form templates, that text does not appear in Web browsers.

Insert a date picker

Insert a date picker on a new, blank form template

1. On the form template, place the cursor where you want to insert the control.
2. If the Controls task pane is not visible, click More Controls on the Insert menu, or press ALT+I, C.
3. Under Insert controls, click Date Picker.
4. To add a label to the control, type text above or to the left of the control, followed by a colon (:).
5. To specify the way that the date is displayed on the form, double-click the date picker that was inserted on the form template.
6. Click the Data tab, and then click Format.
7. In the Display the date like this list, in the Date format dialog box, click the display format that you want. Note You can change the display format of the date only if the data type (data type: Property of a field that defines the kinds of data the field can store. Examples of data types include Text, Rich Text, Whole Number, Decimal, True/False, Hyperlink, Date and Time, and Picture.) is text, date, or date and time.
   

Insert a date picker on a form template that is based on an existing data source

1. On the form template, place the cursor where you want to insert the control.
2. If the Controls task pane is not visible, click More Controls on the Insert menu, or press ALT+I, C.
3. Under Insert controls, click Date Picker.
4. In the Date Picker Binding dialog box, select the field in which you want to store the date picker data, and then click OK.
5. InfoPath uses the name of the field or group as the control's label. If necessary, change the label text.
6. To specify the way that the date is displayed on the form, double-click the date picker that was inserted on the form template.
7. On the Data tab, click Format.
8. In the Display the date like this list box, in the Date format dialog box, click the display format that you want. Note You can change the display format of the date only if the data type is text, date, or date and time.
   

Display the current date in a date picker

1. Insert a date picker on the form template.
2. Double-click the date picker that you inserted on the form template.
3. Click the Data tab.
4. Under Default Value, click Insert Formula .
5. In the Insert Formula dialog box, click Insert Function.
6. In the Categories list in the Insert Function dialog box, click Date and Time.
7. In the Functions list, click today, and then click OK twice to return to the Date Picker Properties dialog box.
   Notice that today() appears in the Value box.
8. Under Default Value, clear the Update this value when the result of the formula is recalculated check box.
   Note If you clear this check box, the date isn't updated automatically each time a user opens a form based on this form template. This is ideal in situations where you want users to see the date when the form was created. You can leave the check box selected in situations where you have a Last updated on or Last opened on field, where you want the date to change every time the form is opened.
9. Click OK to return to the form template.
10. To test your changes, click Preview on the Standard toolbar, or press CTRL+SHIFT+B.
11. Verify that the date that appears in the date picker looks the way that you want it to. If it doesn't, you can change how the date or time is displayed by clicking the Format button in the Date Picker Properties dialog box.

Display the current date and time in a date picker

1. Insert a date picker on the form template.
2. Double-click the date picker that you inserted on the form template.
3. Click the Data tab.
4. In the Data type box, click Date and Time (dateTime).
5. Click Format.
6. In the Date and Time Format dialog box, in the Display the time like this list, click the option that you want, and then click OK.
7. In the Date Picker Properties dialog box, under Default Value, click Insert Formula .
8. In the Insert Formula dialog box, click Insert Function.
9. In the Categories list in the Insert Function dialog box, click Date and Time.
10. In the Functions list, click now, and then click OK twice to return to the Date Picker Properties dialog box.
    Notice that now() appears in the Value box.
11. Under Default Value, clear the Update this value when the result of the formula is recalculated check box.
    Note If you clear this check box, the date isn't updated automatically each time a user opens a form based on this form template. This is ideal in situations where you want users to see the date when the form was created. You can leave the check box selected in situations where you have a Last updated on or Last opened on field, where you want the date to change every time the form is opened.
12. Click OK to return to the form template.
13. To test your changes, click Preview on the Standard toolbar, or press CTRL+SHIFT+B.
14. Verify that the date that appears in the date picker looks the way that you want it to. If it doesn't, you can change how the date or time is displayed by clicking the Format button in the Date Picker Properties dialog box.

Layout tips

• To change the size of several date pickers at once, select the date pickers whose size you want to change, on the Format menu, click Properties, and then on the Size tab, make the necessary adjustments.
• To change the border or color of a date picker, select the date picker, on the Format menu, click Borders and Shading, and then make the necessary adjustments.
• To customize the text that appears in a date picker, use the Font and Font Size boxes on the Formatting toolbar. To change the font and font size for all of the date pickers on your form template at once, right-click the date picker that contains the formatting that you want, and then click Apply Font to All Date Picker Controls on the shortcut menu.
• To see what your date picker will look like with actual text in it, click Sample Data on the View menu. This helps you get a sense of what the form will look like when users fill it out.
• On occasion, the text inside a date picker and the label to the left of the date picker may appear to be slightly out of alignment. To quickly realign them, double-click the date picker, click Align on the Size tab, and then click Apply. If the label and date picker are in different cells in a layout table, right-click the cell that contains the label, click Table Properties on the shortcut menu, and then click Center under Vertical alignment on the Cell tab.
• To change the way that the date is displayed, double-click the date picker, click the Data tab, and then click the Format button. Choose a display format in the Date Format dialog box.